Category: EVALUATION BOARDS
Showing all 9 results
8051 Microcontroller Development Board with MAX232 & AT89S52 Microcontroller IC | 8051 Project Kit Supports 40-Pin DIP IC Chip Lis AT89S51,AT89S52,P89V51RD2 etc | 8051 Development Board or 8051 Project Kit Support Atmel AT89S51, AT89S52, P89V51RD2 etc. 40-Pin DIP Microcontroller Chip About of 8051 Development Board: If you are learning microcontroller programming and want to make project based on 8051 microcontrollers than this board will help you. With this Development board, you can develop and prototype with any of 8051(AT89S51, AT89S52, P89V51RD2, AT89Cxx) 40 pin microcontrollers. The board has also status LED. Because of The 1.5, Amp bridge rectifiers allow this board to be powered with both AC and DC power supply adapters. The board having RS232 Serial port for flashing P89V51RD2 (NXP) microcontroller and it is also used for interfacing GSM module, GPS module, RFID module. Furthermore, There is 5V, 12V, GND power bus which allows to power external peripherals module.
LPC2148 Pro Development Board is a powerful development platform based on LPC2148 ARM7TDMI microcontroller with 512K on-chip memory. This board is powered by USB port and does not need external power supply. It is ideal for developing embedded applications involving high speed wireless communication (Zigbee / Bluetooth / WiFi), USB based data logging, real time data monitoring and control, interactive control panels etc. The on-chip USB controller provides direct high speed interface to a PC/laptop with speeds up to 12Mb/s. The UART boot loader eliminates need of an additional programmer and allows you to program using serial port. The on board peripherals include SD/MMC card interface, USB2.0 interface, 4Kbit I2C EEPROM, Xbee / Bluetooth / WiFi wireless module interface, ULN2003 500mA current sinking driver, L293D DC motor controller, 16X2 character LCD and many more. The on-chip peripherals and the external hardware on the development board are interconnected using pin headers and jumpers. The I/O pins on the micro-controller can be accessed from a 50 pin male header. This direct access to I/O pins enables you to connect your own devices very easily to the processor. The board is made from double sided PTH PCB board to provide extra strength to the connector joints for increased reliability.
Micro-controller: LPC2148 with 512 K on chip memory
Crystal for LPC2148: 12 Mhz
Crystal for RTC: 32.768 KHz
50 pin Berg header for external interfacing
Wireless module adapter for 2.4GHz ZigBee (Xbee) / Bluetooth / WiFi connectivity
On board 512 bytes of I2C external EEPROM
USB Type B Connector
SD / MMC card holder with SPI interface
No separate programmer required (Program with Flash Magic using on-chip boot loader)
No Separate power adapter required (USB port as power source)
10pin(2X5) FRC JTAG connector for Programming and debugging
50 Pin Expansion header for easy access to I/O pins
On board Two Line LCD Display (2×16) (with jumper select option to disable LCD)
L293D 600mA Dual DC motor Driver
ULN2003 500mA driver
Two RS-232 Interfaces (For direct connection to PC’s Serial port)
Real-Time Clock with Battery Holder
2 Analog Potentiometer connected to ADC
There is a number of popular families of microcontrollers which are used in the different application as per their capability and feasibility to perform the desired task, most common of these are 8051, AVR, PIC.
AVR is a simple programmable chip. It has a CPU, some flash memory, some RAM & some EEPROM, all in one chip. Flash memory is a storage location, like the hard disk of a computer. RAM is a temporary storage just like computer RAM. EEPROM is used long-term storage. Without EEPROM we can’t run a program from flash memory. The EEPROM doesn’t get erased when the chip loses power.
The MSP-EXP430G2 LaunchPad development kit is an inexpensive and simple development kit for the MSP430G2xx Value Line series of microcontrollers. It is an easy way to start developing on the MSP430 MCUs with on-board emulation for programming and debugging as well as buttons and LEDs for a simple user interface.
Sale!Add to cart
STM32 Nucleo-64 Development Board
The STM32 Nucleo-64 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the external SMPS significantly reduces power consumption in Run mode.
The ARDUINO® Uno V3 connectivity support and the ST morpho headers allow the easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-64 board does not require any separate probe as it integrates the ST-LINK debugger/programmer. The STM32 Nucleo-64 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package.
PIC development Board can be used to evaluate and demonstrate the capabilities of Microchip PIC series micro-controller. It is a great way to start working with latest range of micro-controllers the PIC series. The board is ideal for experimenters or as a main CPU board for a more advanced digital system. The MCU socket on board provides support for 40 pin DIP package of PIC16F778A controller. The board is designed for general purpose applications and includes a variety of hardware to exercise micro-controller peripherals. It is a fantastic tool for code debugging, development and prototyping. The all new board design have made it much more user-friendly than its predecessors, ideally suitable for training and development purposes. The components used in this board are of high quality and the PCB is high quality PCB, which makes this board especially durable. When you start using the EnGeniusLab Development Board you will find it to be one of the best development tool available for Microchip PIC controller
PIC Development Board
This PIC Development board is helps users to easily develop application for PIC. After programming the microcontroller, the code can be run on the development board. All ports of this Development board can easily accessible.
There are number of popular families of microcontrollers which are used in different application as per their capability and feasibility to perform the desired task, most common of these are 8054, AVR, PIC. Microcontroller has a CPU, some flash memory, some RAM & some EPROM all in one chip. Flash memory is a storage location, like the hard disk of computer. RAM is a temporary storage just like computer RAM.
Sale!Add to cart
This development board is a minimal breakout board for the STM8S103F3P6 STM8 microcontroller. All of the I/O pins are marked and routed to standard 2.54 mm pins for convenient use.
EEPROM: The STM8S003F3 has 128 bytes, while the STM8S103F3 has 640 bytes.
Flash Erase: STM8S003F3 100 times, while the STM8S103F3 has 10000 times.
Flash: The STM8S103F2 only has 4K bytes, while the STM8S103F3 has 8K bytes.