Arduino Store

Call To +919778245216

Shopping Cart

close

No products in the cart.

Return to shop

Arduino Store

Shopping Cart

close

No products in the cart.

Return to shop

Category: STEPPER MOTOR

STEPPER MOTOR

Showing all 9 results

  • Sale!

    28BYJ-48 STEPPER MOTOR WITH ULN 2003 DRIVER COMBO Features
    MOTOR
    Rated voltage supply : +5V
    No of phase : 4
    Stride angle: 5.625°/64
    Speed variation ratio: 1/64
    Pull-in torque: 300 gf.cm
    Friction torque : 600-1200 gf.cm

    Read more
  • Sale!

    DESCRIPTION
    This flexible type motor coupling can connect your driving shaft with the driven shaft while it is very efficient in eliminating any misalignment to the possible extent. Minimum backlash is another great advantage of this Aluminium Flexible Coupling Coupler Helical Shaft 5mm x 8mm.

    This Flexible coupling with the outer diameter of 19mm and the length of 25mm is machined aluminium coupling.

    First bore diameter is 5mm and the second bore diameter is of 8mm also.

    It comes with the spiral cut in the middle along its length which makes it flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce binding effects. Such couplings are also known as Beam coupling, helical coupling, Flexible coupling.

    Some of the important features of flexible shaft coupling are,

    Helical cut makes them behave like a springy in the X Y and Z linear axis but not in the rotational axis. That means that you won’t get more backlash, hence they are suitable for precision CNC work.
    A coupling is a device which transmits power and torque. Couplings do not normally allow disconnection of shafts during operation. However, there are torque limiting couplings which can slip or disconnect when some torque limit exceeds.
    By careful selection, installation and maintenance of couplings, substantial savings are possible in reduced maintenance costs and downtime.
    It can protect the driving and driven shaft members against harmful effects because of misalignment of the shafts, sudden shock loads, shaft expansion or vibrations etc.

    Read more
  • Sale!

    Description
    The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA17 4.2 kg-cm Stepper Motor can provide 4.2 kg-cm of torque at 1.2A current per phase.

    The motor’s position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The NEMA17 4.2 kg-cm Stepper Motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.

    They are very useful in the various application, especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.

    It is a brushless DC motor, so the life of this motor is dependent upon life of the bearings. The position control is achieved by a simple Open Loop control mechanism so doesn’t require complex electronic control circuitry.

    It comes with a detachable 70cm cable which makes wiring and rewiring very fast and easy work. The design of this cable is such that it can directly be mounted on a stepper motor controller. So, playing with the connection is done with just snap of fingers.

    The motor’s shaft has been machined for good grip with a pulley, drive gear etc., and especially avoiding stall or slip.

    Read more
  • Sale!

    DESCRIPTION
    They are the special choice for heavy duty CNC machines. They overpass the NEMA17 Stepper Motors because of their inherent operational advantages including comparably high torque at high speeds. This NEMA 23 Stepper Motor is a powerhouse when it comes to larger machines that require extra torque. The NEMA 23 7.2 kg-cm Dual Shaft Hybrid Stepper Motor can provide 7.2 kg-cm of torque at 1A current per phase. The NEMA 23 7.2 kg-cm Dual Shaft Hybrid Stepper Motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.

    Read more
  • Sale!

    Description
    This NEMA 34 Stepper Motor is a powerhouse when it comes to larger machines that require high torques. These are specially designed to withstand high torque requirements of large CNC machines.

    The NEMA34 46 kg-cm Hybrid Stepper Motor is a brushless dc motor that operates in Open Loop Control system. The motor shaft is customized and has a shape of 94-UP Mustang V. This type of shaft is useful in providing stability in high power operation.

    Read more
  • Sale!

    DESCRIPTION
    They are the special choice for heavy duty CNC machines. They overpass the NEMA17 Stepper Motors because of their inherent operational advantages including comparably high torque at high speeds. This NEMA 23 Stepper Motor is a powerhouse when it comes to larger machines that require extra torque. The NEMA 23 18.9 kg-cm Step Hybrid Stepper Motor can provide 18.9 kg-cm of torque at 2.8A current per phase.

    The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA 23 18.9 kg-cm Hybrid Stepper Motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.

    One can equip them on CNC Milling, CNC Router like application which demands extra torque than provided by NEMA17 Stepper Motors.

    It is a brushless DC motor, so the life of this motor is dependent upon life of the bearings. The position control is achieved by a simple Open Loop control mechanism so doesn’t require complex electronic control circuitry.

    Read more
  • Sale!

    DESCRIPTION
    The 28BYJ-48 is a small, cheap, 5 volt geared stepping motors. These stepping motors are apparently widely used to control things like automated blinds, A/C units and are mass produced. Due to the gear reduction ratio of approximately 64:1 it offers decent torque for its size at speeds of about 15 rotations per minute (RPM).

    Read more
  • Sale!

    DESCRIPTION
    This Mounting Bracket is designed for NEMA17 Stepper Motor to mount it on the application firmly and securely. This Bracket is for any NEMA 17 Stepper Motor with 31mm hole spacing and four screws. There are two 30mm long slots, and 30mm apart with each other so you can easily attach it. This is a solid construction of steel with welded 90-degree support triangles.

    Read more