Arduino Store

Call To +919778245216

Shopping Cart

close

No products in the cart.

Return to shop

Arduino Store

Shopping Cart

close

No products in the cart.

Return to shop
Sale!

Control Your Room Lights With Your Mobile | Make Your Home Smart | Arduino Uno FULL Project Kit with code And video tutorial

1,200.00 inc GST

Out of stock

Compare

1. Arduino uno
2. 5v 4 channel relay module
3. hc-05 bluetooth module
4. jumper wires male to female

5.battery

6.wire

 

 

1) Home Automation System

CODE :-

String inputs;
#define relay1 2 //Connect relay1 to pin 9
#define relay2 3 //Connect relay2 to pin 8
#define relay3 4 //Connect relay3 to pin 7
#define relay4 5 //Connect relay4 to pin 6
#define relay5 6 //Connect relay5 to pin 5
#define relay6 7 //Connect relay6 to pin 4
#define relay7 8 //Connect relay7 to pin 3
#define relay8 9 //Connect relay8 to pin 2
void setup()
{
Serial.begin(9600); //Set rate for communicating with phone
pinMode(relay1, OUTPUT); //Set relay1 as an output
pinMode(relay2, OUTPUT); //Set relay2 as an output
pinMode(relay3, OUTPUT); //Set relay1 as an output
pinMode(relay4, OUTPUT); //Set relay2 as an output
pinMode(relay5, OUTPUT); //Set relay1 as an output
pinMode(relay6, OUTPUT); //Set relay2 as an output
pinMode(relay7, OUTPUT); //Set relay1 as an output
pinMode(relay8, OUTPUT); //Set relay2 as an output
digitalWrite(relay1, LOW); //Switch relay1 off
digitalWrite(relay2, LOW); //Swtich relay2 off
digitalWrite(relay3, LOW); //Switch relay1 off
digitalWrite(relay4, LOW); //Swtich relay2 off
digitalWrite(relay5, LOW); //Switch relay1 off
digitalWrite(relay6, LOW); //Swtich relay2 off
digitalWrite(relay7, LOW); //Switch relay1 off
digitalWrite(relay8, LOW); //Swtich relay2 off
}
void loop()
{
while(Serial.available()) //Check if there are available bytes to read
{
delay(10); //Delay to make it stable
char c = Serial.read(); //Conduct a serial read
if (c == ‘#’){
break; //Stop the loop once # is detected after a word
}
inputs += c; //Means inputs = inputs + c
}
if (inputs.length() >0)
{
Serial.println(inputs);

if(inputs == “A”)
{
digitalWrite(relay1, LOW);
}
else if(inputs == “a”)
{
digitalWrite(relay1, HIGH);
}
else if(inputs == “B”)
{
digitalWrite(relay2, LOW);
}
else if(inputs == “b”)
{
digitalWrite(relay2, HIGH);
}
else if(inputs == “C”)
{
digitalWrite(relay3, LOW);
}
else if(inputs == “c”)
{
digitalWrite(relay3, HIGH);
}
else if(inputs == “D”)
{
digitalWrite(relay4, LOW);
}
else if(inputs == “d”)
{
digitalWrite(relay4, HIGH);
}
else if(inputs == “E”)
{
digitalWrite(relay5, LOW);
}
else if(inputs == “e”)
{
digitalWrite(relay5, HIGH);
}
else if(inputs == “F”)
{
digitalWrite(relay6, LOW);
}
else if(inputs == “f”)
{
digitalWrite(relay6, HIGH);
}
else if(inputs == “G”)
{
digitalWrite(relay7, LOW);
}
else if(inputs == “g”)
{
digitalWrite(relay7, HIGH);
}
else if(inputs == “H”)
{
digitalWrite(relay8, LOW);
}
else if(inputs == “h”)
{
digitalWrite(relay8, HIGH);
}
inputs=””;
}
}

Category:

Reviews

There are no reviews yet.

Be the first to review “Control Your Room Lights With Your Mobile | Make Your Home Smart | Arduino Uno FULL Project Kit with code And video tutorial”

Your email address will not be published.

Sale!